Our unique stanchion system allows multiple Floodgates to be connected together to form a continuous flood protection barrier.

The system comprises two basic parts; the stanchion itself (blue - right) and the anchor that it bolts on to (grey - right).

The anchor is permanently set into the ground leaving its top face flush with the surface of the ground. Four grub screws protect the threaded mounting holes from dirt and damage when the system is not in use.

When the time comes to deploy the system, a single Allen key is all that is needed to remove the grub screws and bolt the stanchions into place. The relevant Floodgates are then fitted into position between the stanchions and expanded using a 17mm spanner to complete the job.

The Floodgate stanchion system is ideal for protecting larger openings such as shop fronts, factory doors, garages or even driveways.

The stanchion uprights can be deployed in a matter of minutes and are completely removable, allowing unhindered access in non flood conditions.

Even a small amount of water in your home or business can cause untold damage and it’s not just doorways that provide an easy route for water to enter a property.

The Ventguard is designed to protect vulnerable breathing points, such as air bricks on the exterior of a property.

Once sited, it takes seconds to operate the unique bung system, sealing the aperture against water intrusion.

The Ventguards are manufactured from GRP moulded plastic and are available in 2 sizes to protect single (maximum dimensions 240mm x 120mm) and double (maximum dimensions 240mm x 240mm) air bricks.

The covers can be hand painted to match the colour of the property if required.